What Is Secondary Glazing?
Secondary glazing is a good method to increase the efficiency of thermal energy and reduce noise in windows with single glazing. Unlike replacement primary window units, it doesn't require the removal of frames from the existing ones and is more suited to older properties.
A reputable company will be able to offer support following installation, including an informal call within a week or two to ask how you're getting on. They must also be FENSA accredited and provide a product warranty.
Improved thermal efficiency
Secondary glazing can help to reduce heat loss, and eliminate drafts. It can also make your home more comfortable and peaceful. It is important to understand that this kind of solution isn't an alternative for double or triple glazing, and can only provide modest improvements in the efficiency of your heating.
Glass isn't a good insulation however, the layer of air or sometimes argon gas between two panes glass can slow down the transfer of heat from warm to cold and also reduce condensation. Double-glazed windows that have an insulation layer between the panes will prevent cold air from entering your home, and keep warm air inside.
There are a variety of systems, some of which can be installed with DIY kits while others require a professional installation. There are systems that can be fitted to sliding sash windows and other frames that are already in use. Some are able to open and close while others are fixed to the wall.
The most cost-effective kind of secondary glazing is the 'lift-out' system, which is fitted inside the window that already exists and lifts out of a secured channel. This is the best option for a sash window, or when access to primary windows is limited.
Depending on the quality of the glazing used and the type of gap between the primary and secondary windows, certain products may provide higher insulation levels than other. The greater the gap between two panes of glass the more efficient the thermal performance will be.
In certain situations the addition of secondary glazing to a home can boost its energy efficiency up to a point at which it can match the insulation provided by modern double or triple windows. This is particularly true for older properties where planning restrictions restrict the type of replacement windows that can be put in place. In these instances secondary glazing is the most cost-effective option to seal the frames of sash windows that were previously in use.
Reduced noise
Windows let plenty of noise into your home. This is especially a problem for those living close to flight paths or railway lines. In these situations upgrading to double-glazed windows can reduce the impact that the outside noise can have on a home. Secondary glazing is a fantastic alternative for those who are unable or do not want to replace all their windows. This is the process of adding an additional window to the existing frame of a house. This'secondary' window provides an additional (sealed), barrier to help protect your home from cold air, as well as external noise.
Noise pollution is an actual issue that can cause long-term health problems in the event that it is not addressed. Ecoease offers a low-cost solution to reduce the amount of noise from outside that can enter your home. Our secondary double glazing is a fantastic option for those who want to reduce noise pollution without having to spend an enormous amount to replace their windows.

The main benefit of secondary glazing is that it creates an additional barrier between your home and the outside world, significantly lessening the amount of noise pollution. This is achieved by installing an independent frame and pane within the window with the distance of about 100mm. The second window can to be opened and shut for ventilation, which is not the case with the primary window.
This barrier is used to insulate a room from cold air that could otherwise escape through the window and down the wall. double glazing near me helps to keep the room warm and also cuts down on energy costs.
Additionally the secondary glazing also helps to reduce the level of noise created by traffic and other outside activities. The extra barrier between your home and the outside world provides great comfort and can make an enormous difference in your daily life.
Another bonus of the system is that it can be attached to almost any type of window such as awning windows, vertical sliding sash windows, and even sliding doors. It can be fitted to individual windows or to multiple windows in a home and is a much more cost-effective alternative than changing all of your windows. It will also help keep the appearance of your home and be an alternative that is more aesthetically pleasing for listed properties where changing windows may alter their appearance.
Security is a priority.
Double glazing is usually considered to be a costly alternative. This is not always the case. Secondary glazing is actually less expensive than you think, particularly when you consider its effectiveness as a security solution. It is not only an effective barrier, but also provides insulation. This makes it difficult for burglars to break through. Instead of replacing your existing windows with double glazing, which can be a complicated process in many cases and may require planning permission, you can install secondary glazing instead.
Contrary to windows that can be customized to fit any home secondary glazing is designed to fit on the inside of existing window frames. It's a simple and affordable solution that offers a variety of benefits. It also increases the security of your home by making it less noisy.
When you are looking for secondary glazing near me, you should be aware of the quality of the products and the service provided by the installers. Ask about their insurance certificates, certifications and warranties. It is also important to take into consideration how long the company has been operating for. Selecting a reputable company will help you ensure that the work is done correctly and efficiently.
Secondary glazing has the primary benefit of reducing heat loss and improving the soundproofing of draughts by creating an additional window behind your existing windows. The second pane functions as an insulation layer that reduces heat loss and cuts down on noise intrusion. It is also a cost-effective way to upgrade your existing windows without having to replace them all.
If you have windows with a single glass in your older house you're likely to spend lots of money on cooling and heating. This is because glass is a fantastic conductor of heat. This means that hot water and electricity are lost through your windows while you're trying to stay warm in the winter.
Making the investment in secondary glazing is the best solution to this issue. This type of window treatment is much less expensive than installing new windows and will provide you with numerous advantages, including better insulation, less energy costs and enhanced security. You can also choose from a variety of different styles, including hinged units and lift-out secondary glazing.
Improved appearance
One of the major concerns for many homeowners is the effect that replacing their existing windows would impact the appearance of their house. Secondary glazing can increase the same thermal efficiency as double glazing without altering the appearance. The process of installing it is a much easier process than replacing windows that were originally installed and can be completed quicker, too.
The process involves an individual frame and pane, which are placed on the inside of the window, typically leaving a gap of about 100mm between them. This serves as a barrier to heat loss, and the rubber seals aid in separating the space from the window and limit the transmission of sound. It can also be used to increase the insulation value of period buildings where planning restrictions prevent the installation of modern double-glazed units, such as in conservation areas or listed buildings.
There are many different styles of secondary glass to meet your needs. These range from systems that open like a window to those that are anchored to the existing sash frames. Some are designed to be as subtle as is possible using small frames that are hidden from view and are unobtrusive inside. They are especially beneficial in situations where regular ventilation is required, as opening the sash may result in an hazard to health and safety in the event that a significant amount of wind is blowing into the building.
Certain companies offer permanent secondary glazing made of aluminium that is installed on the exterior of your current window, offering more energy efficiency and a modern appearance. This is a great option for buildings that are listed or historic. It is also cost-effective if you're on a tight budget. It is possible to select the colour and woodgrain finish that matches your home, thereby making it appear as if it's been there for a long time of the property.
It is crucial to choose a company that has expertise in working on your specific property, and has a good customer service reputation. It is also worthwhile looking through reviews on the internet and asking for recommendations from friends and family. Check if the business is registered with professional associations like the Glass and Glazing Federation.